thickness from 0,1 mm to 0,7 mm
Industrial Resin Roof Coverings
The continuous, waterproof, and durable solution from RPM Italy to protect industrial buildings and prepare the roof for the installation of photovoltaic systems.
Waterproofness
The resin coating creates a continuous and seamless membrane that blocks water infiltration and protects the substrate from stagnation, degradation, and weather agents.
1
Durability
Designed to withstand rain, UV rays, frost, and thermal excursions, the resin of RPM Italy maintains elasticity and performance over time, reducing cracking and maintenance interventions.
2
Preparation for photovoltaic systems
The resinous surface consolidates the roof and provides a stable and certified base for the installation of photovoltaic panels, without compromising the waterproofing.
3
What are resin industrial coatings?
The industrial resin coatings of RPM Italy are high-performance waterproofing systems designed to protect the roofs of warehouses, production facilities, and commercial structures. These are continuous coatings, free of joints and perfectly adhering to the substrate, capable of sealing the entire surface and critical points of the roof.
Unlike traditional membranes, resin creates a monolithic membrane that eliminates the weak points typical of overlaps, significantly improving the durability and reliability of the roof.
The RPM solutions for industrial coverings
Based on the conditions of the roof and the objectives of the intervention, RPM Italia uses different waterproofing resin systems:
Why choose a resin industrial coating
Choosing a resin coating means adopting a continuous waterproofing system, designed to work in severe environmental conditions. The resin protects the substrate from infiltrations, degradation, and climatic stress, drastically reducing the risk of structural damage. The continuity of the coating also allows for intervention on existing roofs without invasive demolitions, improving the performance of the covering and extending its useful life.
Resin coatings as the ideal base for photovoltaics
Industrial resin coverings represent a strategic solution for companies looking to install photovoltaic systems. The continuous and consolidated surface ensures a stable base for the fastening systems, preventing infiltrations at the anchoring points. The certified BROOF cycles guarantee compatibility with fire safety requirements and make the covering suitable for hosting solar panels in total safety, without compromising waterproofing over time.
Where industrial resin coatings are used
The resin coatings made by RPM Italia find application in numerous industrial and professional contexts. They are particularly suitable for industrial warehouses and production facilities, where it is essential to ensure high waterproofing and operational continuity, as well as for warehouses and logistics centers subject to large coverage areas and constant environmental stresses.
The resin is also successfully used on commercial and office structures, garages, hangars, and technical coverings, as well as on flat or slightly sloped roofs, perfectly adapting to different geometries and supports. These systems represent an ideal solution both for the recovery and refurbishment of deteriorated coverings and as a technologically advanced alternative to traditional waterproofing membranes, offering greater durability, continuity, and reliability over time.
How an industrial resin coating is made
The intervention begins with a technical assessment of the roof and its conditions. After preparing the substrate, a specific primer is applied, followed by the resin waterproofing cycle, calibrated according to the required performance. The installation takes place in multiple steps until a continuous, elastic, and perfectly adhering membrane is created, capable of sealing every detail of the covering and making it immediately functional and ready for photovoltaic systems.
Preliminary analysis of the environment
Every project starts with a technical inspection during which the existing support, environmental conditions, and usage methods of the floor are analyzed to identify the most suitable resin system and to prevent future issues.
1)
Preparation of the substrate
Targeted mechanical processing, such as sanding, grinding, and shot blasting, is carried out to prepare the concrete substrate, or of another type, which is essential to ensure the adhesion of the resin cycle and the durability of the flooring.
2)
Execution of complementary works
Before or during the installation of the resin floor, complementary works are carried out, namely drainage supports, perimeter edges, and skirting boards. These elements help to complete the environment and facilitate cleaning and sanitization.
3)
Application of the resin cycle
Based on the required performance, the installation of the resin floor is carried out following specific cycles. We calibrate thicknesses, finishes, and slip resistance to achieve a continuous, safe, and durable surface.
4)
Final inspection and commissioning
Once the curing cycle is completed, and thus the catalysis of the product, the surface is ready to be used. At the end of the application, the floor is checked in every detail to ensure safety, continuity, and compliance with the project.
5)
Certifications and technical documentation
6)
At the end of the work, RPM Italia provides the client with the technical documentation related to the applied system, including the certifications required for each sector, to support the needs for monitoring and managing the flooring over time.
Request a consultation or an inspection
RPM Italia creates outdoor resin floors for homes, businesses, commercial areas, and public spaces. Contact us for a technical assessment and to choose the best system for your project.
